G94:Simple facing cycle

SYNTAX

G94...X...Z...F

G73:Pattern Repeating Cycle

SYNTAX

G73 U.. R..
G73 P.. Q.. U.. W.. F..

Where

G72:Multiple Facing Cycle

SYNTAX

G72 W.. R..
G72 P.. Q.. U.. W.. F..

Where

G71:Multiple Turning Cycle

SYNTAX

G71 U.. R..
G71 P.. Q.. U.. W.. F..

Where
U    DEPTH OF CUT IN X AXIS (RADIAL)
R    RETRACTION
P    START N BLOCK NUMBER
Q    END N BLOCK NUMBER
U    FINISHING ALLOWANCE IN X AXIS
W    FINISHING ALLOWANCE IN Z AXIS
F    FEEDRATE 

G90:taper turning cycle

SYNTAX

G90 X....Z....R...F

Where
(X,Y) is target point
F is feed rate
R is tool digging value

Tool Path

G90:simple turning cycle

SYNTAX

G90 X...Y....F

Where
(X,Y) is target point
F is feed rate

Tool Path

Profile

Speciality of Gorilla Glass

TSOP IR Receiver

The TSOP is a IR remote control receiver series. This IR sensor module consists of a PIN diode and a pre amplifier which are embedded into a single package. The output of TSOP is active low and it gives +5V in off state. When IR waves, from a source, with a centre frequency is incident on it, its output goes low. 

Remote Control Light

OVERVIEW

Ultrasonic Sensors

Ultrasonic sensors (also known as transceivers when they both send and receive, but more generally called transducers) work on a principle similar to radar or sonar, which evaluate attributes of a target by interpreting the echoes from radio or sound waves respectively.

 Active ultrasonic sensors generate high frequency sound waves and evaluate the echo which is re

Pressure sensor MPX4115 interfacing with 8051

MPX4115 a motorola pressure sensor is powered by 5V and delivers output voltage ranging from 0.25V to 4.75V corresponding to pressure 15Kpa to to 115Kpa resprctively.sensor detects pressure produces corresponding voltage which later converted into 8-bit binary number by ADC0804  and passes an accordingly scaled voltage to microcont

Screenless Display

The latest display technology -Touch Screen Display, commonly used in our smart phones and tablet computers will move to a mere history in the coming future. Screenless Display, the emerging new display technology will replace this touch screen environment. The main aim of the Screenless Display is to display or transmit the information without the help of a screen or the projector. Using this display, we can directly project images onto the human retina, open space and even to the human brain.

Temperature sensor(lm35) interfacing with 8051

The project is built to demonstrate working of LM35 temperature sensor interfaced with 8051 through ADC0804. The LM35 series are precision integrated-circuit temperature sensor produced output voltage (o.o1v per 1° of voltage change) is linearly proportional to the temperature.

Stepper Moter Controller:555 Timer

DRIVING STEPPER MOTOR USING 555 TIMER AND 4013 IC 

SAA1042 Stepper Motor Driver

The SAA1042 drives a two–phase stepper motor in the bipolar mode. The device contains three input stages, a logic section and two output stages. The IC is contained in a 16 pin dual–in–line heat tab plastic package for improved heatsinking capability. The center four ground pins are connected to the copper alloy heat tab and improve thermal conduction from the die to the circuit board. 

Pages

Subscribe to MechaTerrain RSS

Who's new

  • ravirajpatil871...
  • shubhambajoria
  • yassir
  • demiholyman890954
  • scottgillum51169040

Get Notified

 

Share

We are Social

Syndicate

Subscribe to Syndicate