Welcome to Mechaterrain

Submitted by Ankit on Mon, 09/22/2014 - 14:57
A VERY WARM WELCOME TO ALL @Mechaterrain, a great place for electronic circuits, schematics, tutorials and designs. Browse through all electronic projects which have already been tested. Discover articles on RFID, 8051, AVR tutorials and get use to them. Get ultimate working codes. Find out about latest technology around the world.

Tongue For Dumb (hand gesture based communication interpreter system)

Gargi-arya's picture
Submitted by Gargi-arya on Sat, 06/13/2015 - 13:36

Idea behind the development of this module is to speak for the voiceless people in order to fulfill their basic needs thereby to make them self reliable and independent. It aims to facilitate vocally disabled people by means of a hand gesture based communication interpreter system.  A system that can efficiently translate gestures made by  hand to both text and auditory voice. 

BLOCK DIAGRAM

Hexa Legged Robot

Submitted by staff member on Sat, 05/16/2015 - 00:44

This project studies the motion of a compact and highly mobile six-legged all terrain robot that rolls on wheels when possible, but can use the wheels as feet to walk when necessary. While gaited walking may suffice for most situations, rough and steep terrain requires novel sequences of footsteps and postural adjustments that are specifically adapted to local geometric and physical properties.

INTRODUCTION

Pneumatic Crane

Submitted by staff member on Sat, 05/02/2015 - 23:56

A crane is a mechanism which is commonly used to elevate goods or materials, and is therefore referred to as a lifting mechanism usually equipped with chains or wire ropes, a winder (also called a wire rope drum), and sheaves. A crane is used to carry materials both vertically and horizontally. One or more simple machines are utilized by the crane for creating mechanical advantage and thus, loads which are over the individual capacity or capability will be moved without any problem.

G82:Single Peck Drilling with Dwell

Submitted by staff member on Thu, 04/09/2015 - 20:25

SYNTAX

G90/G91...G98/G99...G...X...Y...Z...R...P...Q...F...K...

G81:Single Peck Drilling

Submitted by staff member on Wed, 04/08/2015 - 10:01

SYNTAX

G90/G91...G98/G99...G...X...Y...Z...R...P...Q...F...K...

Rectangular Pocketing

Submitted by staff member on Mon, 04/06/2015 - 17:53

SYNTAX

G172   P.. Q.. R.. X.. Y.. Z.. I.. J.. K..
G173   I.. K.. P.. T.. S.. R.. F.. B.. J.. Z..

Circular pocket

Submitted by staff member on Sun, 04/05/2015 - 00:50

SYNTAX

G170 P.. Q.. R.. X.. Y.. Z.. I.. J.. K..
G171 P.. T.. S.. R.. F.. B.. J..

G68:Code For Axis Rotation

Submitted by staff member on Thu, 04/02/2015 - 18:09

SYNTAX

G91 G68  I.. J.. R..

G91     INCREMENTAL
G68     AXIS ROTATION
I,J       CENTRE POINT OF ROTATION
R        ROTATION

NOTE:G69 AXIS ROTATION CANCEL

G54:Coordinate Shift

Submitted by staff member on Thu, 04/02/2015 - 10:07

SYNTAX

G54...X...Y...

Profile

M98:Part repetition

Submitted by staff member on Thu, 03/26/2015 - 22:26

SYNTAX

M98 P000 0000(Subprogram Call)

⇒In P First 3 Digits Means No. Of Reputability
⇒Last 4 Digits Means Subprogram No.   
⇒At Maximum We Can Run The Program 999 Times
⇒Maximum No Of Sub Programs In A Program  Are 9999 Times.

Milling:Circular interpolation

Submitted by staff member on Tue, 03/24/2015 - 09:18

SYNTAX

G90 X...Y....F

Where
(X,Y) Target point
F Feed rate
R Radius

Circular interpolation commands
G02 CIRCULAR INTERPOLATION CLOCKWISE
G03 CIRCULAR INTERPOLATION ANTICLOCKWISE

G02 & G03:Circular interpolation

Submitted by staff member on Thu, 03/19/2015 - 11:05

Circular interpolation commands

G02 CIRCULAR INTERPOLATION CLOCKWISE
G03 CIRCULAR INTERPOLATION ANTICLOCKWISE

Profile

G75:Grooving Cycle

Submitted by staff member on Thu, 03/19/2015 - 10:07

SYNTAX

G75...R...
G75...X..Z...P... Q...F...

where

G94:taper facing cycle

Submitted by staff member on Wed, 03/18/2015 - 22:05

SYNTAX

G90 X....Z....R...F

Pages

Subscribe to MechaTerrain RSS

Who's new

  • ravirajpatil871...
  • shubhambajoria
  • yassir
  • demiholyman890954
  • scottgillum51169040

Get Notified

 

Share

We are Social

Syndicate

Subscribe to Syndicate