new to keil then surely you have many doubts rounding in your mind
steps to all your queries are here.......
Step 1.Install the uVision Keil
Step 2. Open the micro vision kiel
step 3.click on program,select new uVision project
step 4. create project with .asm for assembly and with .c for embedded c
step 5.select device name(chip) on which code is being burned
step 6.type crystal frequency of oscillator and mark on "create HEX file"
step 7.add file to source group you have been created earliar
step 8 Write a program in Embedded C in the working window.
Category: